Polish AC™ is bituminous coal that has been exposed to extreme heat which activates the carbon giving it powerful absorbing powers. The billions of pours within the
carbon act as hundreds of sponges soaking in many pond pollutants such as, tannins, ammonia, nitrite and nitrate. The result is a polished, healthy pond environment. Contaminates and particles stick to and become absorbed by the activated carbon. For best results replace after three months of usage.
Format: 5 Pounds
5 lbs treats 2,000 gallons.
Routine Application Rate
Rinse carbon throughly before use. Remove bag provided from bucket and fill with the appropriate amount of carbon for your pond size or filter size. Then rinse the bag thoroughly to remove any carbon dust accumulation. Then apply to filtration unit. It is always best to use Polish AC™ in conjunction with a filter. It is not recommended to use Polish AC™ by itself within the pond. Replace bag with new Polish AC™ carbon every 3 months. It is important to maintain fresh activated carbon especially throughout the spring and summer season when pond pollutants are at their highest levels.
Persistent Problem Application Rate
For large fish loads it is advisable to double the amount of carbon for the pond size.
For Best Results
Make sure to rinse Polish AC™ carbon thoroughly before placing in filter. Never wash carbon after it has been in the pond with tap water. If carbon is washed vigorously dunk the bag in water with no chlorine present.
Polish AC™ carbon can be disposed of with normal waste service.
Polish™ AC can be poured into a fine mesh bag (mesh bag included) and the bag can be placed in the pond or in the stream or waterfall to continuosly filter the water and to remove unwanted elements from the pond.