BioTec™ 32000 Pro Pond Filter by Oase®

The OASE Biotec 32000 Pond Filter is a large mult-stage pond filter designed for large fish ponds and ponds with heavier fish load. The first stage of filtration directs the flow into the pond filter into a 300 micron mesh screen which removes course and fine debris from the water to increase biological activity in the next stages. This mesh screen automatically cleans itself every 15 minutes to drastically reduce maintenance and keep the filter operating at peak efficiency.

The biological stage allows the pond water to pass through filter foams that are populated with large colonies of beneficial bacteria to eliminate toxins from the pond water. These filter foams rarely require maintenance, but when necessary, they can be cleaned with a special tool that eliminates the need to remove the foams from the filter.

The Biotec 32000 pond filter's final stage uses Phosless cartridges to bind phosphorous that causes algae growth and remove it from circulation in the pond. These cartridges do need to be replaced from time to time.

Effective Filtration Capacity

Decorative pond with no fish 32,000 gallons
Goldfish pond or pond with low fish density 16,000 gallons
Koi ponds or heavy fish loads 8,000 gallons

BioTec™ 32000 Pro Pond Filter
For ponds up to 32,000 gallons.
For smaller ponds use the BioSmart 10000 & BioTec 18000

The BioTec 32000 Pro is a multi-stage mechanical and biological filtration system in a compact package, designed for larger ponds or for ponds with high biological load (many fish).

In the initial mechanical filtration stage, particles and debris are caught by a 300-micron mesh, which is cleaned automatically at regular intervals. Removal of coarse debris at this stage improves the efficiency of the biological filtration phase and significantly reduces maintenance frequency.

During biological filtration stage, the water is channeled through a series of filter foams that create a special environment by allowing the settling of beneficial bacteria. During this stage, harmful ammonia and nitrites are converted to nitrates, which support plant life in the pond. BioTec 36000 features a built-in cleaning mechanism that does not require removal of the filter foams during maintenance.

In a final stage, dissolved phosphate is removed with OASE Phosless cartridges. These cartridges bind phosphate which promote algae growth and remove it from circulation. Phosless cartridges are consumables and need to replaced from time to time.

Manufactured by: OASE
Merchant SKU: 50119
Effective Pond Size: up to 32000 gal. (without fish)
Recommended Pump Capacity: 1600 gph (min) to 7000 gph (max)
Intake Connection: 1 1/2 inches. threaded female (2 x)
Tubing Connector (intake): 1 inch., 1 1/4 inches., 1 1/2 inches., 2 inches.
Outlet Connection: 4 inches. (via Adapter Ring)
Sludge Drain Connection: 2.5 inches.
Mechanical / Biological multi-chamber flow-through pond filter design
Incorporates "Screenex" filter system for large particulate removal
Sensor & LED lights alert you when the pond filter needs to be cleaned
Special tool allows for filter pad cleaning without removal from the pond filter
Pond filter can be buried up to 2/3 of its volume
Filter Foams: 16 (8x Red, 8x Blue)
Power Cable Length: 7 ft (primary), 16 ft. (secondary)
Power Consumption: 5W
Power Requirement: 110V / 60Hz
Dimensions (L x W x H): 47 x 32 x 30 inches.
Limited Warranty: 3 years
For Optional UV Clarifier add the Bitron 110C